Access to Pelican Nordvest
1. Arrival/Driving in
Once the move-in date on your room has started, you have access to the center from 05:30 - 22:00 every day - 365 days a year.
To enter, you must enter the code that you have received by email.
The code is an 8-digit code and must be entered on the access machine located on the left side of the gate.
The gate will then open and you can drive into the area.
When entering the code, it is important that you first press * (star) - the whole code - and then # (square).
The gate is open on weekdays from 05:30-18:00 and on Saturdays from 10:00-14:00.
If you use the center outside these times, the gate is closed and you need your code to open it.
See the video "How to enter your code".
2. Unloading/loading area
Here you can easily drive your car, trailer or moving van under our loading and unloading area.
You'll be close to the entrance and can unload in dry weather.
Parking in front of the building can be used as long as you are on site, but please make sure to leave space for our other customers.
Numbered parking spaces (opposite the entrance) are private/rented and may not be used without prior agreement.
3. Entering code at sliding door
Enter your code again to open the sliding door.
Remember *(star) - the whole code - and then # (square).
4. Customer trolleys
When you enter the unloading hall, there are customer carts that are free to use.
All you need is either DKK 10, DKK 20 or a trolley coin to get the trolleys free.
Help the next customer and please put the carts back when you're done.
5. Overview of floors and elevator access
By the elevators there are signs with an overview of where to find the room numbers, on the different floors and on the ground floor.
Find your room number and see which floor you are going to.
For your information, the first number in your room number is the floor you are going to.
Example: Room 3124 is on the 3rd floor.
To open the elevator, you need to enter your code again on the access machine, which you will find between the elevators.
Again, remember to press * (star) - the whole code - and then # (square).
Then the first available elevator will open and you can enter the elevator and press the floor you need.
6. Floor overview - find your room
When you get to the floor where your room is, you'll find an overview of the entire floor on the wall opposite the elevators.
The yellow spot with a red cross marks where you are standing and on the overview you need to find your room number and then find your way to it.
7. Put your space to use
Once you have found your room, it is very important that you double check that you are standing by the correct room number. To find your room, make sure you take the room closest to the room number (sticker) you have been given.
Open the room by pushing the metal rail on the door to the right and the door will open. Inside the room, a welcome bag is ready for you, in which you will find a new security-approved cylinder lock and keys. There is also an information letter that you are welcome to read through and keep.
You can now start using the room.
8. How to lock and open the room
To lock the room, close the door and push the metal rail to the left as far as you can to keep the door closed. Then insert the cylinder lock into the lock hole on the door and turn the key to the left and remove the key - the room is locked.
If you have trouble inserting the cylinder lock into the door
There are 2 small dots on the cylinder lock. If you hold the cylinder lock so that the two dots are at the top and right next to each other, you can easily insert the lock into the hole (see picture).
See also the video "How to lock the room".
To open the room again
Insert one of the supplied keys into the cylinder lock and turn the key to the right, then pull the cylinder out of the door. Push the metal rail all the way to the right and the door can now be opened.
See also the video "How to open the room".
